Silky Tile Fixer
S Fix 905

Tile-Fixer-S-Fix905

PRODUCT OVERVIEW
Silky Tile Fixer S Fix 905 is a premium Type 1 tile adhesive designed for installing ceramic and vitrified tiles in both interior and exterior applications. It offers excellent bonding strength, easy workability, and a smooth finish for long-lasting results.

Quick-Application

Quick Application

Highlyh-Flexiible

Highly Flexible

Tile-&-Stone-Expert

Tile & Stone Expert

Excellent-Strength​

Excellent Strength

Areas of Application

  • Interior walls & floors; dry and moderately wet areas (kitchens, bathrooms, utility rooms)

  • Balconies/covered exteriors (non‑immersed, protected from heavy rain)

  • Tile types: ceramic, vitrified/porcelain, and compatible natural stones not sensitive to moisture staining

Method of Application :

  1. Add clean water to Silky Tile Fixer HS and mix thoroughly until a lump free mortar is obtained. A 20 kgs bag will require  approximately 4-6 Liters of water. The adhesive once prepared, no further water should be added while in use.
  2. Apply the adhesive to the substrate using notched trowel. Spread not more than 1 sqm at a time.
  3. When fixing marble slabs and tiles for exterior use, apply adhesive both to the tiles and substrate.
  4. Press the tiles firmly into position with a slight twisting action.
  5. Depending on the porosity of the tile surface and atmospheric conditions, tiles should be fixed within 
  6. 20 min. of adhesive being applied. Tiles can be adjusted up to 20 minutes after fixing.
  7. Clean off surplus adhesive from the tiles face and between the joints.

Technical Specifications

  • Appearance: Grey or White powder

  • Classification: C1T (EN 12004 / ISO 13007)

  • Pot Life: ~ 3–4 hours (ambient conditions dependent)

  • Open Time: Up to 20 minutes (site conditions may vary)

  • Adjustability Time: ~ 10–15 minutes

  • Bed Thickness: 3–6 mm (thin‑bed)

  • Coverage: 55–60 sq.ft per 20 kg (3 mm notched trowel, smooth substrate)

  • Foot Traffic / Grouting: After 24 hours

  • Pack Size: 20 kg

  • EN 12004 / ISO 13007: C1T (cementitious, normal adhesion, reduced slip)

  • ANSI A118.1T compliant

  • Manufactured in an ISO 9001 certified facility

Limitations

  • Not for immersed or submerged areas (pools, tanks). Use S Fibre Max 919.

  • Not for metal, gypsum‑based or unstable substrates without proper priming/underlay.

  • Do not apply over dusty/weak surfaces or on substrates with rising damp

Health, Safety & Environment

  • Wear gloves, mask, eye protection; mix/use in well‑ventilated areas.

  • 🚫 Keep out of reach of children. Do not ingest.

  • ♻ Dispose of contents/containers as per local regulations.

Scroll to Top