Silky Synthetic Enamel
Silky Synthetic Enamel – The perfect combination of elegance and toughness. Available in a range of stylish shades-including a stunning white. The mirror-like gloss stands to wear and tear as only most premium enamel can.
Beautiful Finish
Stain Resistance
Fungal Resistance
Direction for use:
CLEANING : Sand the surface with Emery Paper 180 to remove loose particles, paint dust/grease and cracked or flaked paint from the surface to be painted & make it clean.
PRIMER : For wooden surfaces, use Silky Wood Primer. For metal or steel surface use Silky Red Oxide metal primer. allow drying for 6 to 8 hours.
PUTTY : Smoothen the surface by filling the cracks with thin coats of putty. For walls & wooden surfaces, use Silky Wall Putty. For metal surfaces, use Silky Synthetic Filler. Allow drying for 6 – 8 hours. Sand with Emery Paper 180 and wipe clean.
PRIMER : Apply another coat of primer. Allow drying for 6-8 hours. Sand with Emery Paper 320 and wipe clean.
TOPCOAT : Thin a litre of Silky Synthetic Enimel with 100ml to 120ml minrel turpentine oil. Apply 2 coats with an intreval of 8 hour, between both the coats.
RECOMMENDED FOR:
Exterior/ lnterior surfaces of Cement plaster, brick work and masonry. Do not use on any horizontal surface with Foot or vehicle trafic. For the best possible finish, Please Follow the directions below. Paint failure may occur if the surface preparation and application directions are not followed.
WARNING!
Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as property fitted respirator (NIOSH approved) and proper containment and cleanup. For more information call your local health authority.